I had mentioned a long time ago that I was working on some solutions for light switches. At that time there were not a lot of out of the box solutions that weren't Z-Wave or Zigbee based. Additionally, my old home mostly relied on lamps rather than ceiling lights leaving a few popular options at...
Now that you have your new drive tray and new servo arms in place, you need a controller and remote. You could use a commercial RC hobby controller that has the ability to mix mecanum wheels. However, depending on your goals, you might miss out on some expandable options that can really only be done...
The Omnibot back in the day was a marvel but certainly had some interesting limitations. One item that they seemed to design as an after thought was the little round eyes. They were simple light bulbs that took a note from every other Spensor gift of the era - they flashed to the sounds that it...
The factory drive for the Omnibot 5402 and Sr use two sets of wheels that are driven by two motors - one per side. This gives the Omnibot skid steering like a tank. It can turn in its own footprint and move forward and backward but not side to side (called strafing). For this project, I want to...
As a kid I dreamed of getting one of the Omnibots from RadioShack! Each Christmas and birthday I would beg and bargain for one but to no avail. They were too expensive for a toy, my parents would say. I dreamed of "programming" it to do all kinds of things little knowing that my parents were...
I'm really terrible at this whole blogging thing. 😕
Anyway, a lot and a little has been going on since my last home automation project overview. I have been really busy with odds and ends over the last year and a half although, only a little has been spent in any meaningful additions to my sub...