Well another year of testing has come and gone so, it's time for an update! In short, I'm nearly there. This version is the last one with components mounted to a proto board. This is also the last dedicated version of the software.
Sometimes buying cheap can be a blessing in disguise. In the case of our new memory foam bed base, if we hadn't decided to skimp, we may not have realized the joy of an intregrated bed in our smart home scheme.
As I mentioned in UPDATED: My Home Automation Roadmap, I found that controlling lamps with remote switches is an easy and efficient method of bringing dumb lamps into the smart home fold. However, it introduces a new issue, I don't want to have to pull out my phone every time I want to turn one on or off. Imagine needing to get up in the middle of the night and having to find the phone in the dark, blinding yourself when you turn the screen on, finding the app and the lamp in the app and flipping it on ... all while trying to stay somewhat asleep. Enter, control panels.
January 1st at 12:01AM I went through the process of deleting my Facebook account. It's pretty straightforward and easy but FB gives you a 30 day cooling off period in case you didn't really mean it and decide to go back. They are hoping that during this withdrawal period, you'll get too fidgety and will come back to get your dopamine hit. I made it though - 33 days and counting!
Ok, this one is short and simple. Later Facebook and Twitter! So long and thanks for all the fish!
It's a funny thing - what you find when you start a project you think you know something about. If you're doing it right then you'll likely discover that you're not as slick as you thought you were. I suppose that is why I love these projects and goals so much. They make me stretch. On the flip-side, scope creep is real thing and not every project can be a voyage of discovery. So, this is my self-imposed roadmap for the first two phases of my overall home automation goals.
Internet of Things, Zigbee, Z-Wave, X10, MQTT, nodes, pairing! What is all of this? In this article, I'm going to go over the common language of home automation and try to help you make sense of all of these terms and concepts. *NOTE* this article is alive and will change as time goes by.
Since buying my printer early last year, I've had a lot of questions about it, like 'where to get one', 'how good is it compared to others' and 'what kind of prints can I get out of it'. What follows comes from numerous emails and private messages with folks over the last year and a half. This document will change as I find new useful info.
As I mentioned in the introduction article of this series, there isn't a standard yet for smart home devices to talk to each other. However, the advertising and hype sure makes smart homes look like an easy care free way of life. Well, it isn't. If someone is telling you it is, beware! Snake oil will soon follow!
Since February of this year, I've been working on a lengthy project - I am slowly adding digital control and automation to the everyday things in our home. This project, unlike most of the others I've started grew out of a need rather than a want. Sure, the want is there and I'd be lying if I said that this wasn't one of the most fun projects I've committed to but, in this case, this project started with attempting to fill a need. Now that this project has matured a bit, I want to start chronicling my journey so that others with a similar need may find these experiments useful.
As I started brainstorming for version 2 of the arm, it became clear that I would need to make some changes so, I upgraded the electronics of my original robotic arm. This will allow me to create more modes of operation and create an I2C secondary interface.